Introducing The Quik-Rack Mach 2

Best Bicycle Carrier that money can buy, Guaranteed!

IMG_6882.jpg
IMG_6895.jpg

Quik Rack Mach 2 shown in lower pivot position for easy trunk access.  The new sealed ball bearings provide a smooth easy to pivot function.  Our old Quik-Rack was metal on metal. 

Because of the customer interests in colors, we plan to only offer a two-tone black and silver finish on the Quik-Rack Mach 2.  This is due to the fact that the trays are wider and have a 45-degree angle.  The trays hold the tires on the sides, not just the bottom of the tray and will leave black tire marks on the silver aluminum.  Therefore, the trays will be anodized black, along with most other parts on the rack, except for the cam latch with support strap, and the cross-coupling bars in the center, which will be silver anodized as well.   

After 9 years the NEW Quik-Rack Mach 2 has been completely redesigned and improved with great NEW features.  Its now quicker, lighter, less expensive and easier to use than the original Quik-Rack.  Works with 5" tires and 12" to 29" wheels.  

The Quickest Just Became "Mach 2" Quicker, and Safer.  FREE Shipping on all products

Have a FAT TIRE Bike?  The Quik-Rack Mach 2 can be used for tires as wide as 5 inches
Attractive two-tone color scheme. Black trays and side plates with small silver highlights

With the new tray support blocks and the stronger tray support cross bar, the new Quik-Rack Mach 2 can hold far heavier bicycles. Because of this new stronger design, it is unnecessary to offer the heavy-duty 2 bike system or the 2 bike add-on.

Because of the new trays  and mount design, all of the Quik-Rack Mach 2 bicycle carriers are considered HEAVY-DUTY  

Weight limits for the 1-1/4 inch receiver are 120 lbs. and 4 bicycles maximum.

Weight limits for the 2 inch receiver are 200 lbs. and 4 bicycles maximum.

$269 FREE Shipping

New Features

Cative+Pin+Pull.jpg

The Quik-Rack Mach 2 has a patented (Patent #9902222) spring-loaded retention pin that automatically engages with the hitch receiver hole.  The crank handle hitch system keeps the rack tight and secure.

No need to reach blindly under your vehicle for the pivot release bar.  Patent #9956922 trigger release mechanism is now easily accessible from the end of the rack.  The patent pending auto-catch links the Add-On's together automatically.

Captive+Pin.jpg

The crank handle hitch system can be installed in just seconds.  Just insert the rack in to the receiver, then tighten the crank handle.  Comes with 4 Keyed alike hardened pad locks for security. 

The NEW patent pending Quik-Rack Mach 2 adjusts for any wheel size. Simply loosen the handle, slide the spool to the desired position then tighten the handle to lock it down. No extra tools needed.

IMG_6816.jpg

1-Bike Quik-Rack Mach 2  Single rack with 2 inch adapter ($269) for tires as wide as 5 inches

The Quik-Rack Mach 2 ($269) Heavy-Duty single for 2 inch receivers only.  For tires as wide as 5 inches           

IMG_6824.jpg

1-Bike Quik-Rack Mach 2 Add-On ($169) for tires as wide as 5 inches

Quik-Rack Mach 2 Platform Roof Trays ($169) for tires as wide as 5 inches Free Shipping

Can be used on bikes with a wheel base up to 56 inches.

Free Shipping on all products

The rigidity and strength of the NEW wider 45 degree Tray works for heavier bikes, including electric bikes.      

Quik-rack Mach 2  -  vs  -  original quik-rack

Features that our original Quik-Rack did not have

  • Patent #9902222 and #10,005,329 spring-loaded captive hitch pin prevents accidental loss of rack

  • Patent #9956922 easy-access pivot bar allows user to always operate from the back, not under the rack.

  • Patent #9956922 and Canada patent #2956005 quick mount Add-On for installing additional Add-Ons in under 5 seconds no tools needed. 

  • Patent #10,011,237 pivot selection plate allows for 3 pivot selections to choose from  

  • Patent pending auto-catch, links the Add-On's together automatically when the Add-On makes contact with the rack or secondary Add-On

  • Patent pending anti-wobble Hitch Bar mounting design   

  • Patent pending hand crank hitch mount system with lock provided for safety and security

  • Patent pending tool-less wheel spool adjustment with infinite range

  • Patent pending auto-tray lock design just open the trays and they automatically lock in place

  • Patent pending cam slider guide to prevent over rotation and jamming

  • Patent pending no-weld hitch design reduces cost by eliminating all welding and heat treating   

  • New wider 45 degree Tray works for heavier bikes, including electric bikes

  • 1-Bike Single Quik-Rack Mach 2 Attractive two-tone color scheme. Black trays and side plates with small silver highlights $269

  • Quik-Rack Mach 2 Add-On Attractive two-tone color scheme. Black trays and side plates with small silver highlights $169

  • The Quik-Rack Mach 2 accommodates 5 inch wide tires and 16 to 29 inch wheels.

  • Can be used on bikes with a wheel base up to 56 inches. 

All of the features above are new and not found on our original Quik-Rack

Free shipping on all products

The new Quik-Rack Mach 2  is replacing our original Quik-Rack $269
The new Quik-Rack Mach 2 Add-On is replacing our original Quik-Rack Add-On $169